Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Modifications and Upgrades
Click Here to Login

 
 
Thread Tools Display Modes
 
Prev Previous Post   Next Post Next
Old 05-31-2018, 01:46 AM   #1
JimQ
Senior Member
 
JimQ's Avatar
 
Join Date: Mar 2014
Location: Central Massachusetts
Posts: 616
Awning Modification

I really dislike the newer type awnings as they are quite flimsy in any type of wind. This past weekend while camping in wet weather, I decided to anchor the awning and utilized screw anchors into the ground, lashing straps with D rings, and stainless steel screw eyes installed on the upright arms, about 5" down from the top. This setup allowed me to leave the awning out overnight without worry and kept the area dry. There was enough room for screw eye anchor nut to be installed on the inside of the upright without interfering with the awnings fully closed position. I am also installing a wheel on the top of the door to protect the awning. I'll use this setup as needed. I would prefer the older manual type awning as they are sturdy .
__________________
JimQ
2012 Ford F 250 Super Duty Lariat 6.2 ; 3.73
2022 KZ C271BKHSE
JimQ is offline   Reply With Quote
 

Tags
awning, mod


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 08:03 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.