Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Lite Weight Trailers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 05-21-2012, 06:47 PM   #1
Jeebs79
Junior Member
 
Join Date: May 2012
Location: Apex, NC
Posts: 17
BBQ mount

I have a 29RBK with the outdoors kitchen. The camper came with a grill mount that swings around from the rear end. We have a Webber BabyQ that we've used for a long time. Does anyone have any ideas on how to mount the Webber to the grill mount? I have a couple ideas but nothing very elegant. Thanks!!
__________________

Jeebs79 is offline   Reply With Quote
Old 05-21-2012, 09:29 PM   #2
fireidiot
Member
 
Join Date: May 2012
Location: St Louis, MO
Posts: 81
I made them put the grill in with the deal, but I think my Baby Q actually has more space. Let me know what you come up with, I may be doing the same thing. The other issue I need to check is, I think having 2 regulators (TT propane and Baby Q) will make for a very small flame on the Baby Q.
__________________

fireidiot is offline   Reply With Quote
Old 05-22-2012, 06:57 PM   #3
Jeebs79
Junior Member
 
Join Date: May 2012
Location: Apex, NC
Posts: 17
For this weekend we will use the new grill that came with the camper. I need to spend some quality time coming up with a solution for the babyQ. I may just get the collapsable cart and use instead of the grill mount. We'll see.
Jeebs79 is offline   Reply With Quote
Old 05-22-2012, 07:49 PM   #4
f6bits
Senior Member
 
Join Date: Nov 2011
Location: SoCal
Posts: 1,739
I don’t like the outdoor kitchens I see or the quick connect for the Weber because both put me under the awning which just seems like a bad place for a grill. I use a table and that gives me extra prep space.
__________________
-Scott, DW, DG, DB, and DD

2011 Passport 2590BH
2009 Ford F150 SuperCrew FX4 5.4L w/Max Tow
f6bits is offline   Reply With Quote
Old 05-22-2012, 09:38 PM   #5
pbryan
Junior Member
 
Join Date: Apr 2012
Location: SE MI
Posts: 17
I've got a Laredo... The grill that came with it was not very good... Left it on high for 15 min, and still couldn't get grill marks on a hot dog. I took the frame that attaches to the swing out bumper mount and attached a piece of plywood to it... I'm planning to put my small Weber on this "shelf" for a trip this weekend. My only concern is that it might be too high off the ground, since the RV grill sat down in the frame, and the Weber will be on top...

If my experiment fails, I'll probably go back to using a small folding table, like I did with my previous RV...

--Paul
pbryan is offline   Reply With Quote
Old 06-07-2012, 08:37 PM   #6
fireidiot
Member
 
Join Date: May 2012
Location: St Louis, MO
Posts: 81
This mount issue has been on my mind quite a bit lately. I am working on a solution. Basically, it is going to involve making a bracket at the bottom of the existing vertical mount and attaching a shelf that will also have two arms that can be attached to the sides (without interfering with the Baby Q). This will allow the shelf to be removed when in transit.

Also, I am going to remove the regulator from the Baby Q and attach some quick connect fittings to it. This will allow me to connect to the trailer or use a bottle if needed.

I am NOT impressed with the "Flame King" I think the name should be changed to Flame Princess.
fireidiot is offline   Reply With Quote
Old 06-07-2012, 09:11 PM   #7
flc
Member
 
Join Date: May 2012
Location: Okla City, OK
Posts: 55
When I ordered my trailer last month I told them to just leave it off. The one that came on my old trailer has been sitting in the box out in the shed for over two years. The trailer came in yesterday and the bumper mount was on it. I'm just going to take it off and put it in the shed. I just personally prefer lump charcoal so I use that. Just my preference.
__________________
2014 Grand Design Reflection 303RLS
2013 Chev S2500HD D/A
PullRite SuperGlide
flc is offline   Reply With Quote
Old 06-10-2012, 11:40 AM   #8
bgilsrud
Junior Member
 
bgilsrud's Avatar
 
Join Date: Feb 2011
Location: shoreview mn
Posts: 23
Smile

Any chance you want to sell on cheap? I would love the mount!
bgilsrud is offline   Reply With Quote
Old 06-10-2012, 12:01 PM   #9
flc
Member
 
Join Date: May 2012
Location: Okla City, OK
Posts: 55
just sent you a PM.
Floyd
__________________
2014 Grand Design Reflection 303RLS
2013 Chev S2500HD D/A
PullRite SuperGlide
flc is offline   Reply With Quote
Old 06-10-2012, 12:40 PM   #10
Bob Landry
Senior Member
 
Join Date: Jan 2011
Location: Austin, Tx
Posts: 1,859
Quote:
Originally Posted by fireidiot View Post
I made them put the grill in with the deal, but I think my Baby Q actually has more space. Let me know what you come up with, I may be doing the same thing. The other issue I need to check is, I think having 2 regulators (TT propane and Baby Q) will make for a very small flame on the Baby Q.
You'll need to remove the regulator on the Baby Q and put a Quick Connect on it. Make up a propane hose with the QC fitting that will connect, use the QC gas outlet on the trailer and enjoy your burgers. Keystone uses Fairview gas fittings. You'll have to use bushings, etc to match the hose to the grill QC but those are available at any hardware stores. Use gas approved connectors. Air compressor fittings from Home Depot won't work. You don't have to stand out in the sun to cook on the Baby Q. You'll never get a flare up and even if you do, the awning is way out of reach. But, if you're paranoid about it, the Baby Q sits fine on a folding TV snack tray



__________________

Bob Landry is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -8. The time now is 10:22 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This forum is owned and operated by Social Knowledge, LLC. It is not authorized or endorsed by the Keystone RV Company and is not affiliated with the Keystone RV Company or its related companies in any way. Keystone RV® is a registered trademark of the Keystone RV Company.