I haven't examined the wiring on mine, but it has LEDs in the rear but standard bulbs everywhere else. The only thing I'm aware of with LEDS is sometimes you have to put a resistor inline to make the turn signals not blink too fast, but other than that 12V is 12V (for this purpose), you're tapping into the wiring feeding the LEDs. To be sure put a meter on it but you should be good. People swap out bulbs for LEDs all the time without changing the wiring.
__________________
2014 Raptor RP300MP w/ Rear Patio Party Deck, Folding Side Ladder, 6 Point Level Up, Carlisle Radial Trail HDs
2004 2500HD D/A CC SB - TTT Mirrors, Prodigy BC, 18K Pullrite Superglide, NEW Fuel Injectors 11/2015 (ouch)
|