|
07-14-2019, 10:21 PM
|
#1
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Incommand malfunction on battery flashing locked unlocked
2018 Alpine 5th wheel... all of a sudden,warm weather, plugged into pickup which is running, but.. when on battery power, the Travel lock touch button flashes locked... unlocked... locked .... unlocked and refuses to respond. This prevents me from putting out the hydraulic slides... and there does not appear to be any override switches on the hydraulic pump...
The screen seems to be normal otherwise... showing 13.4 to 13.6 volts and you can turn the lights on and off... but the 'travel Lockout" will not operate.
I have tried turning the system off.. waiting and turning it back on. To no avail....
Is there a manual over ride on the pump? And what would be causing this problem? It works fine when plugged into shore power..
Thanks for any advise.
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
07-15-2019, 04:50 AM
|
#2
|
Senior Member
Join Date: Mar 2017
Location: Petersburg, KY
Posts: 276
|
any chance your flashers were on? Mine does that when I am checking my lights.
__________________
2017 Fuzion 417
2018 Ram 3500 Longhorn
|
|
|
07-15-2019, 05:43 AM
|
#3
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,015
|
Disconnect fifth wheel plug from TV. Do a reset on BCM.
You don’t need tow vehicle 12 volt power to run hydraulics on your Alpine.
Yes... there is a manual over ride for both slides and levelers. But I’d address BCM issue first.
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
07-15-2019, 05:51 AM
|
#4
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Quote:
Originally Posted by Racebug
any chance your flashers were on? Mine does that when I am checking my lights.
|
YES.... the flashers were on!!!!!
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
07-15-2019, 06:12 AM
|
#5
|
Senior Member
Join Date: Mar 2017
Location: Petersburg, KY
Posts: 276
|
I did the same thing a few weeks ago ! hahaha
__________________
2017 Fuzion 417
2018 Ram 3500 Longhorn
|
|
|
07-15-2019, 06:59 AM
|
#6
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
And I reset the BCM by unplugging all power and battery disconnect, correct?
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
07-15-2019, 07:00 AM
|
#7
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Question then would be.. WHY would the truck flashers affect the DC?
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
07-15-2019, 07:48 AM
|
#8
|
Senior Member
Join Date: Mar 2017
Location: Petersburg, KY
Posts: 276
|
My guess is that they use the signal from bake lights or turn signal to initiate travel lock out.
__________________
2017 Fuzion 417
2018 Ram 3500 Longhorn
|
|
|
07-15-2019, 07:51 AM
|
#9
|
Senior Member
Join Date: Mar 2017
Location: Petersburg, KY
Posts: 276
|
I unlock mine once after the truck is plugged in so I can start the generator from my phone a half hour before we arrive with a cooled off camper. You shouldn't need to do a reset.
__________________
2017 Fuzion 417
2018 Ram 3500 Longhorn
|
|
|
07-15-2019, 11:02 AM
|
#10
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Quote:
Originally Posted by ChuckS
Disconnect fifth wheel plug from TV. Do a reset on BCM.
You don’t need tow vehicle 12 volt power to run hydraulics on your Alpine.
Yes... there is a manual over ride for both slides and levelers. But I’d address BCM issue first.
|
OK, it IS the flashers that are causing the issue....
Now how do you do a manual over ride for the slides and levelers please?
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
07-15-2019, 11:38 AM
|
#11
|
Senior Member
Join Date: Oct 2018
Location: Sacramento
Posts: 1,005
|
It's on the BCM. Take the cover off and look at the controls on it. There will be a selector knob from which you can select the item to move (like slide, awning, etc.) and then In and Out buttons. I haven't tried these on mine yet, but I looked at the controller board to make sure I knew where they were at.
__________________
2022 Cedar Creek Champagne 38EL - "Big Bertha"
2019 GMC Sierra 3500 Denali HD 6.6L Duramax TD, CC, 4WD, DRW - "Mr. Beefy"
|
|
|
07-15-2019, 11:43 AM
|
#12
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Quote:
Originally Posted by MarkEHansen
It's on the BCM. Take the cover off and look at the controls on it. There will be a selector knob from which you can select the item to move (like slide, awning, etc.) and then In and Out buttons. I haven't tried these on mine yet, but I looked at the controller board to make sure I knew where they were at.
|
Mark thank you for the reply... but NONE of the controls on my BCM work the hydraulics.... only electrical... the book says the hydraulic override is on the pump itself... but I don't see anything.
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
07-15-2019, 12:34 PM
|
#13
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,015
|
The controls on the BCM for hydraulic slide outs and six point hyd leveling system do absolutely nothing
Lippert has a manual over ride procedure in their various manuals but personally it is lacking in description....
I put this PDF together a few months ago for some folks on another group.
It’s not perfect but will surely give you more insight
My fifth wheel is an Alpine ... procedure will work on any Lippert hydraulic slide out and six point hyd leveling system. Location of solenoid for front LG may be on left front but most as on passenger side
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|
|
|
07-15-2019, 12:39 PM
|
#14
|
Senior Member
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 3,015
|
Lippert hydraulic slide out and level up manual over ride steps...
|
|
|
07-15-2019, 12:54 PM
|
#15
|
Junior Member
Join Date: Jan 2018
Location: West Fork
Posts: 23
|
Quote:
Originally Posted by ChuckS
The controls on the BCM for hydraulic slide outs and six point hyd leveling system do absolutely nothing
Lippert has a manual over ride procedure in their various manuals but personally it is lacking in description....
I put this PDF together a few months ago for some folks on another group.
It’s not perfect but will surely give you more insight
My fifth wheel is an Alpine ... procedure will work on any Lippert hydraulic slide out and six point hyd leveling system. Location of solenoid for front LG may be on left front but most as on passenger side
|
WOW.... thank you... It certainly does not look easy, and I hope I never have to do it this way. But at least now I know the procedure!
__________________
2018 Chevrolet High Country 3500 Duramax
2018 Keystone Alpine 3900RE Toy Hauler
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|