|
|
04-16-2012, 01:38 AM
|
#61
|
Senior Member
Join Date: May 2011
Location: forked river nj
Posts: 314
|
Quote:
Originally Posted by SteveC7010
I positioned the front feet to match the picture in the instruction sheets. Thinking about, it probably doesn't really matter which way they are pointed.
|
I think you got yourself turned around in the pictures- I installed mine this weekend and the "t" part is shown pointing in towards the center of the rv. As long as the cross bar does not hit the leg I do not think it would matter.
For me It would matter as I found a good place to mount to the frame that was not 90 degrees from the foot.
Good write up and pictures- I also went on top of plastic and sheet metal. When on the sheet metal I used washers to level the mount.
__________________
2011 F250- gas- 4 star tuner- k&n intake
2011 Cougar 325srx
2015 KTM 350 exc-r
KTM 300 xc-sold
ktm 450 exc-r
|
|
|
04-16-2012, 06:59 AM
|
#62
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
I thought I read on the steadyfast site instructions that the orientation of the foot was installer's choice and didn't really matter.
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
04-16-2012, 06:59 AM
|
#63
|
Senior Member
Join Date: Jan 2011
Location: Arvada, CO
Posts: 709
|
Sorry, auto correct bites again -steadyfast not steadfast. And I just found "edit" on tapatalk, corrected the auto correct but don't see a "delete" option
__________________
2010 Laredo 245RL
2007 Dodge Ram 2500 CTD 4x4
Andersen Ultimate Gooseneck mount
|
|
|
04-16-2012, 10:37 AM
|
#64
|
Junior Member
Join Date: Jan 2012
Location: Rhode Island
Posts: 27
|
Steadyfast / Wheel chocks
I just ordered my Steadyfast last Friday; I am excited to get it installed. Does anyone have a recommendation for what type of wheel chocks work best with Steadyfast? I just purchased my fiver so I am still gearing up and don't have wheel chocks yet.
|
|
|
04-18-2012, 02:41 AM
|
#65
|
Senior Member
Join Date: May 2011
Location: forked river nj
Posts: 314
|
Some photos of the install. I need to zip tie the gas line back so it does not rub the brace.
__________________
2011 F250- gas- 4 star tuner- k&n intake
2011 Cougar 325srx
2015 KTM 350 exc-r
KTM 300 xc-sold
ktm 450 exc-r
|
|
|
04-18-2012, 04:49 AM
|
#66
|
Senior Member
Join Date: Apr 2011
Location: Arrey,
Posts: 2,368
|
dave-g, Howdy;
Thanks for showing a 'hidden hazard'. Nice pix.
What's the rear brace look like (attach points)?
Thanks
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.
|
|
|
04-25-2012, 05:08 PM
|
#67
|
Senior Member
Join Date: May 2011
Location: forked river nj
Posts: 314
|
rear brace - attached to tube that goes to the bumper. Jack is up, that is why the bar looks level.
__________________
2011 F250- gas- 4 star tuner- k&n intake
2011 Cougar 325srx
2015 KTM 350 exc-r
KTM 300 xc-sold
ktm 450 exc-r
|
|
|
04-25-2012, 05:21 PM
|
#68
|
Senior Member
Join Date: Apr 2011
Location: Arrey,
Posts: 2,368
|
dave-g, Howdy;
Thanks for the pic. Do you have one of the sliding 'bike rack'
thingies ? From the words you used I'm not sure...
Would you be so kind as to enlighten me/us ...
Thanks Bud, appericate it.
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.
|
|
|
04-26-2012, 01:59 AM
|
#69
|
Senior Member
Join Date: May 2011
Location: forked river nj
Posts: 314
|
mine is a cougar 325srx toy hauler- no bike rack I have a garage!
Take the plunge on the steadyfast you will be happy you did.
__________________
2011 F250- gas- 4 star tuner- k&n intake
2011 Cougar 325srx
2015 KTM 350 exc-r
KTM 300 xc-sold
ktm 450 exc-r
|
|
|
04-26-2012, 04:29 AM
|
#70
|
Junior Member
Join Date: Jan 2012
Location: Rhode Island
Posts: 27
|
Installed my system
I installed my Steadyfast system last night, took me 4 hours. There were a few mistakes that I made that slowed me down a little. One big one was I don't have a tow vehicle because we are seasonal campers so I had to rig up some blocks in the bed of my 1500 sierra pickup and lower the trailer down until the landing gear was off the ground so I could change the foot pad. That with a few other minor items cost me about an hour. I actually didn't even walk inside yet to test how it works since I got done around 8:30 last night. I will let everyone know my opinion on how effective it is later today.
I can say that the quality of the material if first rate, they give you plenty of fasteners and mounting options. I had a new cordless drill that worked great and a Bosch cordless driver that was fantastic to install the bolts. Those tools helped make the install fast.
__________________
2004 Montana 3685 FL
|
|
|
04-26-2012, 04:45 AM
|
#71
|
Senior Member
Join Date: Apr 2011
Location: Arrey,
Posts: 2,368
|
dave-g, Howdy;
Thanks for the reply and clarification.
I have already purchased a kit from Steady-fast.
As I full-time, and need to weild (I think so), the rear
bracket to the 'bike rack' I'm having that done today
in a few hours. Getting ready to re-locate
back to Utah, so this is also a 'test pack-up and systems
check'.
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.
|
|
|
04-27-2012, 05:33 PM
|
#72
|
Senior Member
Join Date: Apr 2011
Location: Arrey,
Posts: 2,368
|
Howdy All;
Update;
Had the weilding done yesterday. went with the stright to the channel
that the sliding tray (?), slides in and out in. Looks just like;
http://www.keystonerv.org/forums/sho...?t=4262&page=2
Post #18... We also weilded the new 'feet' (I bought 4), to the rear Satbilizer feet as they are the round ones and very thick.
I'll drill and mount the front system next week when I get back to Utah.
Pull out in the Morning....
hankaye
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.
|
|
|
04-27-2012, 05:48 PM
|
#73
|
Senior Member
Join Date: Jan 2011
Location: wv
Posts: 504
|
Hankaye have a safe trip home
__________________
2002 Chevy Avalanche 5.3 k&n cold air intake
2011 keystone hideout 26b
New tv 2005 dodge lb ctd quad cab
New TT 2014 j@%$O 32BHDS
|
|
|
04-28-2012, 05:32 AM
|
#74
|
Junior Member
Join Date: Dec 2011
Location: oklahoma
Posts: 26
|
i just installed steadyfast on my 39ft toy hauler. back from a short camping trip. Had 3 adults and 3 teenagers sleeping in it and not once was awakened by the trailer rocking. very stable.
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|