Typically there is a U shaped end cap that is screwed to the wall and the shower walls slide into that U. Once adjusted, a couple of sheet metal screws are driven through both the U and the shower wall frame to secure them in place. If the wall warps or if the floor buckles/sinks, the shower enclosure will not remain "level". It should be as simple as removing the top rail, removing the screws and realigning the shower wall, then reinserting the screws and top cap. Once leveled, be sure to reseal the base and any areas that may leak.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|