Tightening the cables in a slide is extremally easy. All you do is tighten the turn buckle bolt at the end and tighten it, like a bicycle brake cable. Once the tension is off and it feels somewhat tight with just a bit of up and down spring, it's tight. It takes all of 5 minutes to do this (or less). And I would never pay someone else to tension mine. It's just too easy to do myself. You can do it too. Watch a few Youtube videos on adjusting and fixing RV slide cables and you'll see how simple this really is. Even for someone else who has never done this, the most difficult part will be to figure out how to gain access to the end of the cables, sometimes by removing the fascia above the interior of the slide out. Once removed, all of 5 minutes, simply to tighten and run the slide in and out a couple times to check the tension.
__________________
2019 Montana High Country 375FL
2014 Chevy Duramax HD 6.6 - 3500 Diesel Dully Long bed Crew Cab
|