|
|
11-16-2015, 04:04 PM
|
#21
|
Senior Member
Join Date: Jun 2015
Location: WI
Posts: 424
|
Quote:
Originally Posted by Blondeegal
We got the drawers out per your excellent instructions! Thanks!
Now, what we found was the the same as the original posting-panel had come loose in the corner, exposing some insulation. Trying not to disrupt original construction, stuck my hand in as far as I could and from what I can tell only thing in there is the insulation. SO, am wondering if it is the insulation that is causing the odor when the sun is beating on the nose cap.
We have had the unit since it was new, and did not notice it in the beginning. So my theory is that maybe the panel was sealed in the beginning, worked itself apart after a while and the opening is allowing the smell of the insulation to escape into the drawer area.
After we disposed of the brads that had worked their way out, we reattached panel by using about half a dozen #8 small x3/4 self tapping sheet metal screws to secure panel to corner strut. As there is no corner trim, used a small bead of caulking to fill in gap.
Headed to to Tucson, so will let you know if this sealed up the escaping odor!
|
Let me know how it goes, we're winterized till probably april. Sounds like we have the same thing, Wife and I said chemical smell. Didn't really notice it till about middle summer, drawers cubby is only place we smell it.
|
|
|
12-18-2015, 07:59 PM
|
#22
|
Junior Member
Join Date: Oct 2011
Location: California
Posts: 24
|
Still Have the Odd Smell
Well, my theory above, regarding the insulation has not panned out! Pretty disappointed we noticed the smell again.
Will keep you posted if we find an answer, and hope you will do the same. At least we have found someone with the same problem, and we are not entirely crazy!
__________________
2012 Cougar 327RES
2011 Chevy 2500 HD Duramax/Allison
|
|
|
05-08-2016, 04:44 PM
|
#23
|
Senior Member
Join Date: Jun 2015
Location: WI
Posts: 424
|
Quote:
Originally Posted by Blondeegal
Well, my theory above, regarding the insulation has not panned out! Pretty disappointed we noticed the smell again.
Will keep you posted if we find an answer, and hope you will do the same. At least we have found someone with the same problem, and we are not entirely crazy!
|
Well, got the rig out and once again when the sun beat on the cap, bam instant smell. I had the drawers out again this spring, fixing the board that was laying behind the drawers(it was amazing keystone missed the stud with 2 screws), and did a little more looking in there for possible smell causes, and i didn't see anything that looked like mold or would have caused a smell. The smell is only in the TV hole. I'm going to call the place where the camper was originally purchased as it has an extended warranty on the unit and see if it is something that would be covered. If not, i think I'm going to take a utility knife and cut the paneling out of the TV hole and see what it is in there. The unit has been inside storage since December and the 2 weekends we used it so far this year it has not rained. I would hope its not a moisture issue.
|
|
|
05-08-2016, 06:36 PM
|
#24
|
Junior Member
Join Date: Oct 2011
Location: California
Posts: 24
|
Quote:
Originally Posted by kfxgreenie
Well, got the rig out and once again when the sun beat on the cap, bam instant smell. I had the drawers out again this spring, fixing the board that was laying behind the drawers(it was amazing keystone missed the stud with 2 screws), and did a little more looking in there for possible smell causes, and i didn't see anything that looked like mold or would have caused a smell. The smell is only in the TV hole. I'm going to call the place where the camper was originally purchased as it has an extended warranty on the unit and see if it is something that would be covered. If not, i think I'm going to take a utility knife and cut the paneling out of the TV hole and see what it is in there. The unit has been inside storage since December and the 2 weekends we used it so far this year it has not rained. I would hope its not a moisture issue.
|
Just spent the last 4 months in Tucson-our RV spot faced north-no odor. Got home, where our fifth wheel faces east, and gets a pretty good piece of the rising sun. Bam! We have the odor back.
Please keep us posted on what you find.
__________________
2012 Cougar 327RES
2011 Chevy 2500 HD Duramax/Allison
|
|
|
05-10-2016, 04:57 PM
|
#25
|
Senior Member
Join Date: Jun 2015
Location: WI
Posts: 424
|
|
|
|
05-11-2016, 05:43 PM
|
#26
|
Senior Member
Join Date: Jun 2015
Location: WI
Posts: 424
|
Well tonight i tore into it, and got it out threw 24" of chloroplast type insulation up on top and wedged it in with a fiberglass bat so it didn't move to reflect off what little i left cutting off with the scissors. Here's what was cut off, and the front tore apart.
|
|
|
05-12-2016, 01:23 AM
|
#27
|
Senior Member
Join Date: Mar 2010
Posts: 452
|
What type of material did you pull down, is that a fiberboard or a flexible panel to get to that area in the closet.
And how did you manage to pull it down?
Thanks
Ron
__________________
2019 Cougar 25RLS
03 Dodge 2500 Cummins
Disc brakes
700 watts solar
2000 watt inverter
|
|
|
05-12-2016, 07:30 AM
|
#28
|
Senior Member
Join Date: Jun 2015
Location: WI
Posts: 424
|
It is a somewhat flexible wood paneling that many would call luan I believe. After removing the doors, and the Decorative "header" the paneling edge was exposed between the ceiling and the cap wall. I cut it with a sharp utility knife at both ends that were caulked, and then on the closet side of the "divider" wall, so i could get my hands up in there. On our unit it is pinned on with 18 or 22 Gauge brads that really don't hold well. I started with a straight screwdriver at one end and pry'ed a corner and pulled the rest with my fingers. It wasn't too bad of a job. When i reassembled it I used 1/2" pan head sheet metal screws at the top so it would be easier if I ever had to get back in there, you'd never see them, and pinned the trim.
|
|
|
05-12-2016, 08:22 AM
|
#29
|
Senior Member
Join Date: Jan 2014
Location: Winnipeg, Canada
Posts: 1,196
|
Who would have thought it would be excess EPDM material? Glad you were able to figure it out and deal with it.
__________________
2018 Jayco Eagle HT 265BHS (previous: 2015 23RB Passport Elite, ProPride)
2015 F250 XLT SB Crew, 6.2l gas
PullRite 16K SuperGlide w/SuperRail
Reese 5th Airborne (bagged) Pin Box
RoadMaster Shock Kit
X-Factor Cross Bracing
|
|
|
05-12-2016, 02:36 PM
|
#30
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
I have been reading thru this and am also glad you got the problem IDed and taken care of, who would have ever guessed. I was thinking something dead in the wall or mold.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
05-13-2016, 12:25 AM
|
#31
|
Senior Member
Join Date: Mar 2010
Posts: 452
|
Quote:
Originally Posted by kfxgreenie
It is a somewhat flexible wood paneling that many would call luan I believe. After removing the doors, and the Decorative "header" the paneling edge was exposed between the ceiling and the cap wall. I cut it with a sharp utility knife at both ends that were caulked, and then on the closet side of the "divider" wall, so i could get my hands up in there. On our unit it is pinned on with 18 or 22 Gauge brads that really don't hold well. I started with a straight screwdriver at one end and pry'ed a corner and pulled the rest with my fingers. It wasn't too bad of a job. When i reassembled it I used 1/2" pan head sheet metal screws at the top so it would be easier if I ever had to get back in there, you'd never see them, and pinned the trim.
|
Thanks, good info...
Ron
__________________
2019 Cougar 25RLS
03 Dodge 2500 Cummins
Disc brakes
700 watts solar
2000 watt inverter
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|