Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Toy Haulers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 02-18-2018, 10:32 AM   #1
motohead690
Junior Member
 
Join Date: Feb 2018
Location: Canby
Posts: 1
2011 Outback 230RS garage tie down points

I just purchased a 2011 Outback 230RS and want to add E-track to the floor in the garage to tie down 2 motorcycles. How solid is the floor? Can the E-track be screwed down to any point in the floor or will I need to find the framing to put screws into. Is there someplace I can find a drawing/schematic that shows the framing without sheeting or ????
Any and all help is greatly appreciated.
Tom
__________________
Four wheels move the body
Two wheels move the soul!
motohead690 is offline   Reply With Quote
Old 02-18-2018, 11:14 AM   #2
ctbruce
Site Team | Emeritus
 
ctbruce's Avatar
 
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
1. I would not randomly screw into the floor. You have tanks and wiring under there you don't want to hit.
2. Not just Keystone but almost all if the manufacturers do not have or offer drawings or schematics for their products. No there are none.
3. Put into the frame for more secure anchor points.
4. Drop the Coroplast underneath so you can see what and where things are located.
5. Measure twice, drill once.

Good luck.

Sent from my SM-N950U using Tapatalk
__________________

Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
ctbruce is offline   Reply With Quote
Old 02-18-2018, 01:30 PM   #3
travelin texans
Senior Member
 
travelin texans's Avatar
 
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
I saw my particular brand being built during the factory tour & the frame has crossmembers with 2"×1" aluminum studs/joists on 16" centers running 90 degrees to the crossmembers with 3/4"plywood, not OSB, on top on,the studs/joists. In my case as long as the screws were no more than 2 1/2" long it would fine, not familiar with yours though.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
travelin texans is offline   Reply With Quote
Reply

Tags
outback

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 07:52 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.