|
09-03-2018, 05:19 PM
|
#1
|
Junior Member
Join Date: Aug 2018
Location: WHITTIER
Posts: 11
|
Hideout sink covers
Does anyone know where to get the sink covers that match the design scheme of a 2018 hideout... the sink is about 13x23 but can’t find them any where.. thanks in advance
|
|
|
09-03-2018, 05:46 PM
|
#2
|
Senior Member
Join Date: Feb 2014
Location: radium hot springs bc
Posts: 2,007
|
Quote:
Originally Posted by dannx
Does anyone know where to get the sink covers that match the design scheme of a 2018 hideout... the sink is about 13x23 but can’t find them any where.. thanks in advance
|
I think you can buy teflon sheets on Amazon and cut to fit the sink.
__________________
2018 Ram 3500 6.4 Harvest Edition
2018 Cougar 27RESWE
|
|
|
09-03-2018, 07:36 PM
|
#3
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,984
|
The laminate is called Yosemite Granite and is made by Splendor. Trekwood.com has it in stock for about $225 per sheet but shipping would probably make that price double or triple. They may have sink covers available. Give them a call and see what they suggest.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
09-04-2018, 07:54 PM
|
#4
|
Junior Member
Join Date: Aug 2018
Location: WHITTIER
Posts: 11
|
Does anyone no of any after market ones that fit these sinks?
|
|
|
09-05-2018, 10:19 AM
|
#5
|
Junior Member
Join Date: May 2018
Posts: 7
|
I bought a white cutting board off amazon and cut it down to fit. Then took a 2 inch hole saw and cut a hole to be able to get it out. Works and looks factory.
|
|
|
09-05-2018, 10:22 AM
|
#6
|
Junior Member
Join Date: Nov 2013
Location: Ilwaco WA
Posts: 28
|
I bought a wooden cutting board from IKEA and cut it down to fit. It overs almost half of the sink, so you can still use the faucet.
|
|
|
09-05-2018, 02:10 PM
|
#7
|
Senior Member
Join Date: May 2017
Posts: 279
|
Can you order them from keystone? Our 2016 cougar didn't have them when we bought it.but after some research we learned that they should of been included. Keystone took care of it and shipped them to the dealer free of charge.
|
|
|
09-08-2018, 05:34 PM
|
#8
|
Senior Member
Join Date: Aug 2017
Location: Schulenburg
Posts: 1,164
|
Quote:
Originally Posted by dannx
Does anyone know where to get the sink covers that match the design scheme of a 2018 hideout... the sink is about 13x23 but can’t find them any where.. thanks in advance
|
Do you have an undermount sink? We have a 2017 model with a drop in style sink. Just wondering what type of cover you are looking for?
__________________
Joey
2017 Hideout 308BHDS
2006 F-350 6.0L PSD CC 4X4
|
|
|
09-11-2018, 04:53 AM
|
#9
|
Member
Join Date: Jul 2018
Location: Moosup CT
Posts: 93
|
I purchased this... Winco CBWT-1824 Cutting Board, 18 by 24 by 1/2-Inch, White from Amazon.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
It's 1/2" thick and oversized but I was able to cut it very nicely with a good carbide blade on my table saw. I had my wife spray the blade with silicone spray while I cut to reduce the heat and slight melting that occurred without it. With the silicone the cut was perfect. Then I used a deburring tool around the edges and some very fine sandpaper to finish it off. After the cut was done and perfect I used a 1.25" hole saw to cut a finger hole in one side. It's not a perfect match because the board is pure white but it still looks good and works as expected.
I will post some pics tonight if anyone is interested.
__________________
Tom
2018 Hideout 299RLDS
2015 F350 SD Lariat Platinum Crew Cab, 6.7 Diesel
|
|
|
09-11-2018, 05:09 AM
|
#10
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,454
|
Not sure how Keystone parts system works but my last 5ver was a Forest River and they only sold genuine parts through a FR dealer. That being said, I ordered a set of sink covers from a dealer and they were not all that expensive. You might try calling a Keystone dealer and asking the parts department.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
09-12-2018, 07:08 PM
|
#11
|
Member
Join Date: Jul 2018
Location: Moosup CT
Posts: 93
|
Quote:
Originally Posted by Thomasbeau
I purchased this... Winco CBWT-1824 Cutting Board, 18 by 24 by 1/2-Inch, White from Amazon.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1
It's 1/2" thick and oversized but I was able to cut it very nicely with a good carbide blade on my table saw. I had my wife spray the blade with silicone spray while I cut to reduce the heat and slight melting that occurred without it. With the silicone the cut was perfect. Then I used a deburring tool around the edges and some very fine sandpaper to finish it off. After the cut was done and perfect I used a 1.25" hole saw to cut a finger hole in one side. It's not a perfect match because the board is pure white but it still looks good and works as expected.
I will post some pics tonight if anyone is interested.
|
Here are a few pics of the homemade cover.
__________________
Tom
2018 Hideout 299RLDS
2015 F350 SD Lariat Platinum Crew Cab, 6.7 Diesel
|
|
|
09-13-2018, 03:41 AM
|
#12
|
Senior Member
Join Date: Oct 2016
Location: Macedonia
Posts: 217
|
Very nice work, Tom!
__________________
DocP (Michael)
Former: Keystone Cougar 32RLI and 34TBS
Current: 2019 Georgetown GT5 31L5 motorhome
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -8. The time now is 02:41 PM.