Hello to all. First post here.
I've got a few questions regarding the two A/C units that came with my Avalanche 361TG 5th wheel. I have one unit mounted in the bunk room and another unit mounted in the master bedroom. Both units have a ceiling register type of deal with sliders that will allow the air to blow straight down (see attached pic), or you can close the sliders and the air will be directed straight into the central ducts.
A few questions....there are two thermostats (naturally). One for the A/C unit in the bunk room, and one for the A/C unit in the master bedroom. One thermostat is mounted on the wall of the master bedroom, and the other thermostat is mounted in the hall right outside the master bedroom. Where is the temperature sensor for each thermostat location? Also, the A/C unit in the bunk room runs waaaaay (so far, non-stop) more than the one in the master bedroom. Why is that? If they are both taking temperatures from a location close to one another it seems that both units would cycle on/off at about the same time.
Next thing....the slider register things that will allow the air to be dumped straight down. I'm not interested in using those. Problem is, when I close them off, the air still seeps out around the top perimeter edge of the white bracket that is mounted against the ceiling. Have any of you made a "box" that closes in the area to where the air will blow (without leakage) directly into the ductways? What about the volume of air that blows out of the A/C vents throughout the trailer? Do y'all get a high volume of air being blown out, or not?
I think that's all that I can think of, for now