Quote:
Originally Posted by canesfan
When you zero set the control don't you have to make sure the trailer is level first? The instructions don't mention that.
|
The trailer should be level before you do the zero setting. Do this by manual mode, according to instructions.
As far as leaks, I think they all do a little bit. Mine had a small leak on the left front leg. I tightened the hose nuts and it seemed to work. Be careful and not over tighten it. I think it's best to do this hooked up to truck and slides in, takes pressure off the hoses. Not sure if that makes a lot sense, but sounds logical to me.