Go Back   Keystone RV Forums > Keystone Tech Forums > Modifications and Upgrades
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 07-17-2018, 10:14 AM   #1
Northofu1
Senior Member
 
Northofu1's Avatar
 
Join Date: May 2018
Location: Thornhill
Posts: 128
RV Plumbing schematics

Hello all,

This may be naive of me to expect something floating around out there. Is there such a thing, a place to view placement of water tanks, piping, electrical, etc.? I have a polar package Or equivalent) on my rv so the underbelly is sealed. I saw the post in here about "composting toilets" (Nice jousting between Festus and Steve S ) I have also seen video on youtube about installs. Any info would help. Thanks
Dan
__________________

__________________
2015 Bullet 26 RBPR
2017 GMC Sierra 1500 SLE
Blue Ox 1500 WDH
Northofu1 is offline   Reply With Quote
Old 07-17-2018, 10:44 AM   #2
notanlines
Senior Member
 
notanlines's Avatar
 
Join Date: Oct 2014
Location: Memphis, TN
Posts: 2,611
There is a slight possibility that I'm not telling the truth, but I believe Winnebago is the only MAJOR manufacturer that possibly furnishes some schematics. Oh, by the way, I believe if Keystone furnished schematics they would be wrong anyway.
__________________

__________________
Jim in Memphis
Wife of 46 years is Brenda
2014 F-350 6.7 Powerstroke
2017 Mobile Suites
20K Reese slider
2001 Road king w/matching Harley sidecar
notanlines is online now   Reply With Quote
Old 07-17-2018, 12:37 PM   #3
Mikendebbie
Member
 
Join Date: Nov 2016
Location: Austin
Posts: 54
schematics

I had a 26' Jayco trailer two RVs ago - and Jayco emailed me the framing plans for all walls (inside and out) when I emailed them and asked about stud locations for a TV mount. Nice!

My 1996 Alpenlite 29' fifth wheel had the full electrical schematic included in the owners manual. Nice!

4 years ago I bought a used 1997 KZ Sportsmen travel trailer and it needed a new black tank (long story don't ask). I called KZ for info and they said they did not have documentation for trailers that old...but it sounded and felt like they just did not want to help me out.

I called Keystone 2 yrs ago with questions about the stud locations in my Laredo travel trailer at the time. The girl was clueless at first and then said they do not have any construction/production related info on any of their products. She said all such inquiries have to go thru my dealer. She had practiced the answer many times before. And by the way - my dealer had a blank stare when I asked them for the info. I got no help no where.

However - Keystone might answer questions during a factory tour...seems I have read some threads about that. They send reps to attend some of the Montana Owner's rallies and I believe they answer questions and offer help at those events.

Otherwise - I am very thankful for this and other forums!
__________________
'14 Chevy 3500 LTZ Crew Cab
'18 Montana 3921FB
Austin TX
Mikendebbie is offline   Reply With Quote
Old 07-17-2018, 04:15 PM   #4
travelin texans
Senior Member
 
travelin texans's Avatar
 
Join Date: Nov 2017
Location: Picacho Peak Rv Resort
Posts: 1,044
With exception of Winnebago (yet) all the above mentioned rvs are now owned by Thor, so you probably wouldn't still be able to get drawings.
As stated, even if you were to get schematics they most likely wouldn't be "as builts" but merely suggestions for the folks on the assembly line that put them together as fast as they can, if they had to pause 15 seconds to look at a blueprint that would throw a monkey wrench into the entire assembly line.
__________________

Danny & Linda
Fulltime since '08
2013 Redwood 36FB (FOR SALE)
2013 Denali 3500 DRW D/A
travelin texans is offline   Reply With Quote
Old 07-24-2018, 06:41 PM   #5
Diesel10pilot
Junior Member
 
Join Date: Mar 2016
Location: Montgomery TX
Posts: 5
Hope I can jump in here.

I have a 2009 Fuzion FZ 403, last fall while winterizng it in Alaska, I accidentally dropped a water bottle in my empty black tank. I think a cap was on the bottle, but not sure. The bottle is not visible from the top.

I would be grateful for any suggestions on how to remove bottle. I’m hope I don’t need to drop the tank. I called Keystone, but not drawings or schematics.

Thank you,

Mickey
Diesel10pilot is offline   Reply With Quote
Old 07-24-2018, 06:50 PM   #6
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 7,720
The outlet of the black tank should be 3Ē diameter. If there isnít any turns in the drain line it should come out if you fill the tank with fresh water.

Otherwise, the blade valve should be right at the outlet of the tank and you will only need to dis assemble it. Clean water rinse is your friend.

I would have a ďclear pieceĒ attached to the outlet so you can see if it comes out when you rinse the tank.

If you take the valve apart, note the brand as they each have specific seals that should be replaced.
__________________

__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote
Reply

Tags
plumbing

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RVģ is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 01:44 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.