Factory uses either putty tape or Butyl tape. It is easy to trim the excess with a plastic putty knife. Its more important that the tape seals the back side of the lights and the edges of the trim, so if you trim and find voids, you can press the excess into the cracks.
If your looking to replace, use Butyl tape.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|