|
|
05-31-2015, 05:50 AM
|
#1
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
What about this bike rack??
Ok so I have still been searching other ways to get some bikes with us on trips. I think I may have come up with a solution thats fairly inexpensive, looks pretty durable, and would allow for 2 bikes. So at the very least I could get the kids bikes with us, or our bikes if it was just us.
Wanted to see all of your opinions. Every review over on the e-trailer site is positive, so I like that. Lets assume payload/tongue weight isn't an issue for this discussion. The rack itself weights like 6 lbs. Bikes weigh 36 and 38 lbs.
So 80 lbs more on the tongue. Now while typing this all up I learned that the capacity of the rack is 60 lbs. So I'd be about 15 lbs over weight. So that leaves me thinking twice about it.
But I thought I would share anyways, because a lot of people have more lightweight types of bikes. My kids bikes are a bit heavier because frankly, I wasn't spending a ton of money on kids bikes that they will destroy anyways.
Well anyways here is the link, would still like comments on it, because I may try it anyways, because at least it keeps the bikes visible to me as we are going down the road.
http://www.etrailer.com/Hitch-Bike-R...gs/HE1011.html
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
05-31-2015, 06:16 AM
|
#2
|
Senior Member
Join Date: Mar 2014
Location: Las Cruces
Posts: 4,665
|
My opinion, a bike rack with a 60 lb capacity is pretty week. I wouldn't trust it. We just got back from a trip. Busted a locking pin on ours from the bouncing. Luckily, the locking pin just locks the rack in the up or down position. Even without it, the rack leaned a bit, but still kept the bikes well supported. I'll replace the pin with a grade 8 bolt and check it for wear each trip as well as carry spares. They really do bounce a lot back there, much different than on the back of a car.
This is the link for the 2 bike carrier that we just broke the pin on (little red handle you can see in the pics). It has a 90lb weight capacity and had less than 40lbs loaded on it. That gives you an idea of how much abuse they go through on the back of an RV
http://www.rackattack.com/product-pa...ma-stickup.asp
__________________
Brent
2013 Alpine 3500RE
2019 Silverado 2500HD Duramax
U.S. Air Force Retired (25 yrs)
|
|
|
05-31-2015, 06:21 AM
|
#3
|
Senior Member
Join Date: Mar 2014
Location: Las Cruces
Posts: 4,665
|
Have you considered using a front hitch? This is a link for the one for your truck. I use this to transport our two bikes and put the kids on the receiver on the back of the camper. Works great and I always have a visual of the bikes we spent a ton of money one.
http://www.etrailer.com/fmr-2007_Chevrolet_Tahoe.htm
__________________
Brent
2013 Alpine 3500RE
2019 Silverado 2500HD Duramax
U.S. Air Force Retired (25 yrs)
|
|
|
05-31-2015, 08:26 AM
|
#4
|
Senior Member
Join Date: Oct 2012
Location: Oakfield NY
Posts: 229
|
Ok i gonna weigh in here this weekend i was following a 5th wheel with mypassport in tow. The 5er had a bumper mouth rack with 1 20" kids bike on it. Ater seeing it twist the tube bumper like it did i wounld never put on on my passport i am gonna build a headache rack style bick rack for the back of my truck
|
|
|
05-31-2015, 08:33 AM
|
#5
|
Senior Member
Join Date: Mar 2014
Location: Las Cruces
Posts: 4,665
|
That is why I mount a receiver hitch to the frame and use receiver style bike racks.
__________________
Brent
2013 Alpine 3500RE
2019 Silverado 2500HD Duramax
U.S. Air Force Retired (25 yrs)
|
|
|
05-31-2015, 07:49 PM
|
#6
|
Senior Member
Join Date: Apr 2013
Location: Green Valley, AZ
Posts: 782
|
I've never seen one but it looks good. As long as it clamps really solid and you have the clearance for the clamp it should work just fine. I know it wouldn't work with my Andersen hitch because I don't have that clearance it indicates. I wouldn't worry about bounce at that location.
__________________
Earl
2007 33.5' Arctic Fox Fifth Wheel used for full-timing for several years--now sold
2011 Hideout 23RKSWE that we now use for poking around local parks
2007 Chevy 3/4 ton diesel with Prodigy Brake Control
|
|
|
06-01-2015, 05:53 AM
|
#7
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
Thanks for the replys. I have thought about a front hitch, but aside from having to cut the bumper to make it fit, I wouldn't want to restrict the airflow to the radiator or trans cooler.
I agree the capacity leaves something to be desired, but there will be much less "bounce" being right behind the truck as opposed to the back bumper of the rv.
If I try it, I will report back as to how it works.
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
06-01-2015, 06:05 AM
|
#8
|
Senior Member
Join Date: Jan 2014
Location: Colorful Colorado
Posts: 798
|
Is on the roof not an option for you?
__________________
Current:
'17 Winnebago Vista 31BE / Wife, pesky Eski and loco Toto dog
Former:
'15 Open Range 256BHS / '05 F350 CCLB RWD V10
'14 Keystone Passport 238ML / '13 GC Trailhawk Hemi
RIP Birch (pitbull)
|
|
|
06-01-2015, 11:27 AM
|
#9
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
Quote:
Originally Posted by BirchyBoy
Is on the roof not an option for you?
|
It would be if one mount for one bike wasn't $150...
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
06-01-2015, 11:56 AM
|
#10
|
Senior Member
Join Date: Jan 2014
Location: Colorful Colorado
Posts: 798
|
Quote:
Originally Posted by {tpc}
It would be if one mount for one bike wasn't $150...
|
Keep an eye on CL or local Play It Again Sports if you have them.
__________________
Current:
'17 Winnebago Vista 31BE / Wife, pesky Eski and loco Toto dog
Former:
'15 Open Range 256BHS / '05 F350 CCLB RWD V10
'14 Keystone Passport 238ML / '13 GC Trailhawk Hemi
RIP Birch (pitbull)
|
|
|
06-01-2015, 02:37 PM
|
#11
|
Member
Join Date: Mar 2013
Location: Lakeland, FL
Posts: 41
|
I tried a Yakima roof mount on my F250, way too much wind noise for me. The clamps interfere with the door gaskets.
__________________
2000 Sprinter 275BH 5th
2003 F-250 6.0 SB CC 4X4 Lariat
|
|
|
06-07-2015, 07:16 PM
|
#12
|
Junior Member
Join Date: Nov 2013
Location: Ottawa, ON, CAN
Posts: 22
|
bike racks
Quote:
Originally Posted by {tpc}
It would be if one mount for one bike wasn't $150...
|
you don't have to pay that much. I saw someone selling 4 used thule roof racks for $80 where I live. I find the problem is the height. I have a suburban and getting the bikes up and down is a real workout. i've done it and they are very stable.
I opted for a (used) arvika rack for 3 bikes. there are some good deals to be had online.
__________________
2010 Passport 300BH
|
|
|
06-08-2015, 05:16 AM
|
#13
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
I like the arvika setup. Just not the easiest to find used and get to the states. I'll have to see if there is any room for mounting as well. Right now between the tanks and the battery tray, all the room is taking by the wdh snap up brackets.
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
06-08-2015, 07:06 AM
|
#14
|
Senior Member
Join Date: Aug 2012
Location: Canada
Posts: 402
|
bike rack
have a welding shop install a trailer hitch for You and tell the shop You want to pull a 14foot boat then it will hold the bikes safe and sound reason for a heaver hitch is the bumper on the trailer is not a great thing to trust cheep and know to fail look in other posts You will see the problems of all kinds Bushman
|
|
|
06-12-2015, 06:32 AM
|
#15
|
Member
Join Date: Jun 2015
Location: Hudson, FL
Posts: 41
|
On the Good Sam Forum, someone was talking about how they carry their bikes. They came up with the idea to mount a fork lock on the underside of the wood for the dinette with a strap on the other dinette seat to hold the back wheel. This allowed for both bikes to sit in the area of the dinette (when in bed position). If you travel with bikes a lot this seems to be a pretty good idea.
Here is a screenshot: http://prntscr.com/7g4hwk
I also saw someone do it the opposite way to fit 4 bikes like this: http://prntscr.com/7g4iie
|
|
|
06-16-2015, 08:42 AM
|
#16
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
Still haven't come up with a solution yet, but since I'm not in any real hurry to get the bikes on, doesn't matter much lol.
I did want to comment that I find a similar rack to the last one I posted (the clamp on over the shank) made by curt for 3 bikes and up to 135 lbs. It actually costs a little bit less, so I may try that one instead. Probably not enough room to fit 3 bikes in the space anyways, but if I could get 2, it solves most issues.
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
06-19-2015, 07:54 AM
|
#17
|
Junior Member
Join Date: Sep 2013
Location: Washington State
Posts: 11
|
This is a very timly topic. I'm also looking for a way to carry bikes and free up space in the truck bed. My initial plan was to use a hitch style rack and install a 2" reciever on the bumper of my 2013 Passport 2650BH.
This is the rack i ordered
http://allensportsusa.com/products/h...our-bike-542rr
This is the bumper mount i was looking at
http://www.amazon.com/19100-Travel-T...umper+receiver
I've now got some concern over the bumper being strong enough to support the bike rack. Has anyone used this style setup? I plane to carry 2 bikes on the first trip, but would 4 in the future.
__________________
2013 Passport 2650BH ->- 2010 F150 Lariat
DW, DS, DD & 2yo Boxer
|
|
|
06-19-2015, 08:07 AM
|
#18
|
Junior Member
Join Date: Sep 2013
Location: Washington State
Posts: 11
|
After my above post, I did some searching in the forum. That's why I logged on to start with, but got excited when I saw this thead and posted before searching...
Anyway, it seems like there are mixed reviews about using the bolt on bumper reciever. Would still be open to others idea's, but so far my concerns seem to be valid that the bumper is not strong enough for this set up.
__________________
2013 Passport 2650BH ->- 2010 F150 Lariat
DW, DS, DD & 2yo Boxer
|
|
|
06-19-2015, 12:02 PM
|
#19
|
Member
Join Date: Mar 2013
Location: Lakeland, FL
Posts: 41
|
I'm on my first trip with this rack. http://www.swagman.net/product/bumper-rack-2/
It works well and bikes stay put.
__________________
2000 Sprinter 275BH 5th
2003 F-250 6.0 SB CC 4X4 Lariat
|
|
|
06-19-2015, 01:09 PM
|
#20
|
Junior Member
Join Date: Sep 2013
Location: Washington State
Posts: 11
|
jsm180 - I did look at that style however I need to carry up to 4 bikes.
Do you have issues with this style being in the way while camping? Some spots we go have a tree or dirt bank behind the trailer that this might hit...
__________________
2013 Passport 2650BH ->- 2010 F150 Lariat
DW, DS, DD & 2yo Boxer
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|