2002 laredo 27RL

[weaselguys]

Does anyone know the locations on the water tanks on a 27RL ? I have moved the chairs and table in mine and want to secure the table down and don't want to put a screw into the fresh water tank. Also does anyone know what the Therma-shield tank enclosure listed in the brochure is , I'm guessing just a little insulation around the tanks and the enclosed bottom.

[notanlines]

Better you should drop a small drill bit a little at a time and see how thick your surface is before you put any screws into the floor and then once you know just buy screws that length. It wouldn't matter where the water tanks are located.

[mhbell]

Originally Posted by notanlines

Better you should drop a small drill bit a little at a time and see how thick your surface is before you put any screws into the floor and then once you know just buy screws that length. It wouldn't matter where the water tanks are located.

Good Idea what notanlines said. If the water filler is in the back or rear side, you can bet that the tank is between the frame rails right where you want to anchor the table.
Mel

[weaselguys]

I believe it is right where the table is so I might just try and make a mount that attaches to the table and the d rings that are already in the floor back there.