Most likely there is a panel with open slots, held in at the sides with square head screws. Then you'll see the furnace "box". Take the rear plate off, disconnect the gas line AFTER turning off the propane at the tanks. You'll have some wires that will need to be disconnected. MARK them so it's easy to put back together correctly.
Probably one screw at the center that holds the furnace assembly in, remove it and pull out.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|