|
04-18-2010, 01:59 PM
|
#1
|
Junior Member
Join Date: Apr 2010
Location: Midlothian Virginia
Posts: 15
|
300 mp
|
|
|
04-27-2010, 01:03 PM
|
#2
|
Member
Join Date: Mar 2010
Location: Hiawassee,Ga.
Posts: 50
|
Same Problem RaptorMan!
RaptorMan,
Don't feel so bad! We have the same year and model, and are having the same issues; mostly the front jacks. Keystone is giving our dealer the run-around also. Our dealer feels the issue is the module (circuit board) at the controller. Our Raptor has been at the dealers for two weeks also and we haven't even had a chance to use our new 5th wheel. You would think Keystone, with both of us having the same identical issues, would get these problems fixed sooner than two weeks.
Ron
|
|
|
04-28-2010, 03:07 PM
|
#3
|
Junior Member
Join Date: Apr 2010
Location: Midlothian Virginia
Posts: 15
|
Ron, We got ours back yesterday. I walked around with the guy at the dealer and everything worked just find, Then i pulled it home and raised the front of the trailer and the front jacks would not stop going up. I had to take the fuse out. So I called the dealer and they order a new switch for it but i don't think thats the problem. They already replaced the control module (circuit board). I called keystone again and told me they are doing everything they can do get it fixed. Have you called keystone? If so who are you talking to over there. I have been talking to a woman name Robin. Let me know how everything goes with you.
Mike
|
|
|
05-02-2010, 02:06 PM
|
#4
|
Junior Member
Join Date: Apr 2010
Location: Midlothian Virginia
Posts: 15
|
Well i took it back to the dealer and the new Control module is bad again. Hope to hear something this week. Sure would be nice to use the thing just once without having trouble. Ron thanks for calling me, Maybe with both of us talking to the same person we can get something done.
Mike
|
|
|
05-05-2010, 04:54 PM
|
#5
|
Member
Join Date: Mar 2010
Location: Hiawassee,Ga.
Posts: 50
|
300mp
Got my trailer back Monday, everything working OK. Will be heading Northwest early next week for 3 or 4 months that should check out the control mod.
Mike which fuse did you remove to stop the front jack? The diagram shows 3 30amp fuses. Also pulled-up Interactive web site and can not find are control unit RP-IQ16RX. Is this the same one you have? CW replaced part# 297582 (control sys), would like more information on this control unit.
thanks,ron
|
|
|
05-07-2010, 05:57 PM
|
#6
|
Member
Join Date: Mar 2010
Location: Hiawassee,Ga.
Posts: 50
|
correction 4 30amp fuses
ron
|
|
|
05-08-2010, 05:00 AM
|
#7
|
Junior Member
Join Date: Apr 2010
Location: Midlothian Virginia
Posts: 15
|
Ron Im not sure what part # it was, But the 30 amp fuse is right. I talked to keystone and had them to rewire the front jacks so they don't run thru the module anymore. I picked it up yesterday and we are at a local campground just to check everything out, So far so good. Everything is working good. Everytime we had a problem it started with the front jacks. I also wanted them to just do away with the remote system but they did not want to do that. Hopefully rewiring the front jacks will take care of the problem. I will check on the part # and get back with you.
Mike.
|
|
|
05-10-2010, 03:47 PM
|
#8
|
Junior Member
Join Date: Apr 2010
Location: Midlothian Virginia
Posts: 15
|
Ron, I have the same part number you have. There are 2 30 amp fuses for the front jacks. One is for the up and one for the down. The first time i had a problem one of the 30 amp fuses for the front jacks blew then when i replaced it the whole module shorted out. Nothing would work. Then they put the new module on. When i got it home thats when the front jacks would not stop rising the trailer. So i kept hitting the switch then the 30 amp blew. They said the relay on the control board was stuck. Thats when i asked keystone if the dealer could just rewire the front jacks so they don't run thru the control module anymore, they agreed to do that. So far so good we took it out this weekend and for the first time did not have any problems. Keeping my fingers crossed. Hope this helps you. If you still have my number feel free to call at anytime. Hope you have a fun and safe trip.
Mike
|
|
|
05-18-2010, 06:12 PM
|
#9
|
Member
Join Date: Mar 2010
Location: Hiawassee,Ga.
Posts: 50
|
Mike,
Raptorguy . . . Beemerman here!! Guess what? Everything worked for a week and now (today) we are stuck in Tucumcari, NM; out in know where! You guessed it . . . the front jacks aren't working. Thank you for the location of the fuses. I will check them in the morning. My wife and I had to crank the front jacks manually and we are not at a young age. We emailed Robyne and waiting for a reply.
Ron
|
|
|
05-18-2010, 06:53 PM
|
#10
|
Senior Member
Join Date: May 2010
Location: New Mexico
Posts: 1,270
|
RE: Stuck in Tucumcari, NM ?
Beemerman... I don't know if this info will be helpful to you, but... there's a Keystone Dealer in Clovis, NM (south & east of Tucumcari). It's *Bison RV Center*; toll free # 866-247-6678... they're good folks!
Terri (& Kevin) from southern NM
__________________
'06 Chevy 2500HD 6.6L Duramax/Allison 4x4 CC SB
2010 Laredo 265RL {SOLD}
Reese 15K Pro-series (manual slide)
|
|
|
05-18-2010, 06:58 PM
|
#11
|
Junior Member
Join Date: May 2010
Location: Utah
Posts: 3
|
subscribing
__________________
04' dodge cummins with some mods. 2011 raptor 300mp on the way
|
|
|
05-19-2010, 04:05 PM
|
#12
|
Junior Member
Join Date: Apr 2010
Location: Midlothian Virginia
Posts: 15
|
Ron,
Are the front jacks the only thing not working? If so when you get to a dealer have them rewire the front jacks away from the control module. Since I had them do mine like that everything is working. Hope this helps. Keep me informed.
Mike
|
|
|
05-20-2010, 06:30 PM
|
#13
|
Member
Join Date: Mar 2010
Location: Hiawassee,Ga.
Posts: 50
|
Front Landing Jacks
Thanks Mike and maybe when we get home, I will have the same rewiring done on our camper.
After an hour on the phone, at a local RV Repair Garage, Keystone approved the garage to check out and repair the problem. They found some shorts in the wiring.
I replaced both 30 amp fuses and after their repair, I replaced all 4 fuses with circuit breaker type.
Thanks KanTC for your info on the dealer in NM, but Keystone finally approved the work to be done here in Tucumcari.
I hope all goes well for the rest of our trip. Will keep you posted!
Ron
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|