Something Else to Check
I was on the roof of the Cougar today cleaning and reapplying 303. As I was scrubbing, I noticed three spots under the antenna that were starting to wear. When the antenna is stored for travel, there are three "bumper stops" that rest on the roof. Apparently there's just enough movement with this antenna to allow it to vibrate during travel. Anyway, after getting everything clean and dry, I applied a 6 x 18" piece of Eternabond tape to the area. Now the antenna won't wear though the TPO, and the Eternabond can be replaced if it does wear further.
So, if you haven't checked your antenna "storage position", just a heads up...
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|