|
09-17-2012, 05:21 PM
|
#1
|
Member
Join Date: Jul 2012
Location: Sweetlake, LA
Posts: 33
|
2013 Onan 5500
Just purchased a 381LEV with the new generator. Onan has "upgraded" with new EPA higher emissions standards. We haven't had a chance to take the Raptor on the road yet, but just running generator with A/C's on while working in the RV the motor began to sputter after getting hot. Took it to an Onan dealer-after calling Keystone and he said that Keystone and Onan are aware of the problem-- the damper plate between the exhaust and the air intake needs to be taped up around all the cracks so that the exhaust air doesn't recycle back into the ambient air. Not any tape will do, needs to be heat resistant tape. Just wondering if anyone else has had these problems..
__________________
Kelly & Corrie
2012 Ford F350
2013 Raptor 381LEV
|
|
|
09-17-2012, 05:48 PM
|
#2
|
Senior Member
Join Date: Jun 2012
Location: Wa
Posts: 146
|
yes, mine 2008 has a 2011 5500 onan in it, and it did that same thing this summer. could you take a picture of where to fix it? thanks!
__________________
2005 2500HD CCLB Duramax. LBZ mouthpiece, factory CAI mod, Diamond eye "quiet" downpipe back exhaust/ Reese elite under bed rail hitch
2008 Fuzion 362
2008 KFX 700
2007 Yamaha Wolverine(wife's)
2002 Suzuki LT-A50(daughter's)
1995 Yamaha G14 golf cart
|
|
|
09-17-2012, 06:26 PM
|
#3
|
Member
Join Date: Jul 2012
Location: Sweetlake, LA
Posts: 33
|
Quote:
Originally Posted by maxx1963
yes, mine 2008 has a 2011 5500 onan in it, and it did that same thing this summer. could you take a picture of where to fix it? thanks!
|
Yes, will post pics tomorrow.
__________________
Kelly & Corrie
2012 Ford F350
2013 Raptor 381LEV
|
|
|
09-18-2012, 02:37 AM
|
#4
|
Member
Join Date: Aug 2012
Posts: 31
|
I'm looking forward to seeing these pics. I have the same problem with the generator shutting down when the unit gets hot. I can only duplicate this when the outside temp is above 80 or so. When it's below that, everything seems to run fine.
A month ago we were on two weeks of vacation and it was very hot outside. In two weeks I only put eleven hours on the generator as I couldn't keep it running. Fortunately, I brought along a Honda generator as a backup. This was our maiden voyage in this unit and I wanted to be prepared in case of a problem with the on-board unit and I was lucky I did. The only time this thing doesn't work is when you need it.
I am taking the TH in for service tomorrow for other things as well as this generator issue. I am going to have a difficult time convincing them that there is a problem with the generator when I can't even duplicate it.
__________________
2013 Keystone Raptor 300MP
2008 GMC 2500HD Duramax
|
|
|
09-18-2012, 03:54 AM
|
#5
|
Junior Member
Join Date: Nov 2011
Location: Stratford, Ontario
Posts: 27
|
Generator over heat
Had the very same problem this spring.
I cut the floor of the trailer under the exhaust where the generator sits. (The original install the hole wasn't big enough) Some of the exhaust air was getting directed back to the intake side causing the generator to over heat.
I then made a piece of tin to divide the intake air from the exhaust air and sealed any air gaps with foil tape.
Have run the generator for about 50 hours this summer and have had no more problems.
I'll post pictures later today.
__________________
Montana 3685FL
Chev, D/A
|
|
|
09-18-2012, 06:13 PM
|
#6
|
Member
Join Date: Jul 2012
Location: Sweetlake, LA
Posts: 33
|
Quote:
Originally Posted by Loui
Had the very same problem this spring.
I cut the floor of the trailer under the exhaust where the generator sits. (The original install the hole wasn't big enough) Some of the exhaust air was getting directed back to the intake side causing the generator to over heat.
I then made a piece of tin to divide the intake air from the exhaust air and sealed any air gaps with foil tape.
Have run the generator for about 50 hours this summer and have had no more problems.
I'll post pictures later today.
|
Keystone and Onan are aware of the problem with the new generators. They are now installing a divider wall between the intake and exhaust air. But even with that, they are still having problems- they have not sealed up all the cracks. Now their recommendation is to tape up all the cracks so the air does not mix.
This is what I did....and haven't had a problem as of yet.
__________________
Kelly & Corrie
2012 Ford F350
2013 Raptor 381LEV
|
|
|
09-18-2012, 09:21 PM
|
#7
|
Senior Member
Join Date: Jun 2012
Location: Ontario,Califorina
Posts: 415
|
Having simular problems Mine is in a 361lev raptor 2010 5500 EVAP for califorina emission. I also so took some pictures to see If this is standard factory for most of us.
__________________
Randy69
2010 361lev
f350 larriet 4x4
|
|
|
09-19-2012, 03:02 PM
|
#8
|
Junior Member
Join Date: Nov 2011
Location: Stratford, Ontario
Posts: 27
|
Pics of divider plate
here are a few pics of how I added the plate
[/IMG]
this shows where I had to cut the floor the air was being directed back to the intake side causing the generator to over heat
HTH
__________________
Montana 3685FL
Chev, D/A
|
|
|
09-20-2012, 01:59 AM
|
#9
|
Member
Join Date: Aug 2012
Posts: 31
|
Thanks to all for posting these pics. I've got my TH in for some other service right now but when I get it back I'll be taking steps to correct this problem.
__________________
2013 Keystone Raptor 300MP
2008 GMC 2500HD Duramax
|
|
|
11-04-2012, 06:01 PM
|
#10
|
Junior Member
Join Date: Sep 2012
Location: Ponchatoula
Posts: 14
|
Service Bulletin
Just posted notice from Keystone on service advisory 12-183 which stated contact dealer and some sort of baffle will be installed, not getting a warm fuzzy feeling with this camper, something simple is always going awry, quality control must be lacking at the manufacturer, small things but getting tired of trips back and forth to dealer! Luckily I am only five miles away, but a pain to constant set up and reset without the benefit of camping and why when the job or the work to is outside i find dirt and doors unlocked in camper
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|