Go Back   Keystone RV Forums > Keystone Fleet | Keystone RV Models > Toy Haulers
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 07-20-2018, 03:33 PM   #11
xrated
Senior Member
 
xrated's Avatar
 
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 1,193
Quote:
Originally Posted by Pull Toy View Post
Let her sit level for a few hours after the "lift". If off level, this will let the gasses go back where the gasses belong, etc...


Good Luck,
I plan on at least 12 hours from the time that it goes up to the roof and when I fire it up. The trip up to the roof is going to be done with a rope hoist and hopefully it will be mostly level from the ground all the way to the roof.
__________________

__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2017 Keystone Impact 303 T.H.
2008 GSX-R 750 Track Bike
Excessive payload capacity is a wonderful thing

"If it ain't Fast....It ain't Fun"
xrated is online now   Reply With Quote
Old 07-20-2018, 04:35 PM   #12
ctbruce
Site Team
 
ctbruce's Avatar
 
Join Date: Dec 2015
Location: Kansas City
Posts: 2,769
Quote:
Originally Posted by xrated View Post
Your help was invaluable as a confirmation of the location of the wiring. I ended up putting my thermostat just above the HappiJack control also.

One a side note......did you know that there are no wires per se', going to the HappiJack switch? By wires, I mean like wires in the traditional sense....#14 or #12 or ?? The HappiJack switch assembly has an RJ45 phone connector plug into it from the bottom and there are no other wires. It is being used strickly as a set of control switches and not as "power" switches. In other words, the HappiJack motor assembly area has the actual relays/contacts over there, and the wall switch is just controlling those relays at the unit itself.
Had no idea about the switch. That's different.
__________________

__________________

Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
ctbruce is offline   Reply With Quote
Old 07-20-2018, 05:30 PM   #13
xrated
Senior Member
 
xrated's Avatar
 
Join Date: Oct 2016
Location: "Murvil, TN
Posts: 1,193
Quote:
Originally Posted by ctbruce View Post
Had no idea about the switch. That's different.
There's actually a small printed circuit board with that switch and that's what the RJ45 is plugged into. Betcha that's a costly little bugger to replace if it goes south!
__________________

__________________
2016 F350 King Ranch Crew Cab Dually Diesel 4x4
2017 Keystone Impact 303 T.H.
2008 GSX-R 750 Track Bike
Excessive payload capacity is a wonderful thing

"If it ain't Fast....It ain't Fun"
xrated is online now   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RVģ is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 12:01 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.