|
11-25-2017, 05:12 PM
|
#1
|
Junior Member
Join Date: Nov 2017
Location: Oak Harbor
Posts: 18
|
Bicycle rack
Can I bolt a bicycle rack to the back bumper of my hideout 26rls? It bolts on with u- bolts.
|
|
|
11-25-2017, 05:25 PM
|
#2
|
Senior Member
Join Date: Feb 2014
Location: radium hot springs bc
Posts: 2,007
|
Be a good idea to do a search on this forum before hanging anything on these "bumpers". There is some good advice.
__________________
2018 Ram 3500 6.4 Harvest Edition
2018 Cougar 27RESWE
|
|
|
11-25-2017, 07:10 PM
|
#3
|
Senior Member
Join Date: Sep 2017
Location: Pennsville
Posts: 231
|
The 4x4 bumper in general is not really that thick. The truth is it is strong enough to hold a two bike rack.
Problem over the past is many people place their sewage hose in the bumper, with this comes the residuals dranage and the water comes out in the bumper tube causing it to rust from the inside out. This is usually when the bumper failure is at its worse.
__________________
2018 Passport 2810bh Granite
TV 2014 Ram 1500 Bighorn 4x4 crew cab
|
|
|
11-26-2017, 04:43 AM
|
#4
|
Senior Member
Join Date: May 2015
Location: Near Saratoga Springs,
Posts: 1,131
|
Is the spare bolted to the rear bumper? If yes, then a bike rack will too - but probably not both safely as that back bumper and the way it's mounted just isn't heavily enough built without reinforcing. I would be more inclined to use the TV's front bumper if it is a pickup.
A personal comment about rear bumper mounted bike racks - they are at the furthest end of a long 'train' and are subject to lots of heavy bouncing. With that bounce, those bikes do lots of flopping around. If you have a chance, watch a towed vehicle on the road and how they move befor you commit. I've seen over 40 years a rack full of bikes cbreak loose and slide down the road, a couple bikes loosen and bend a wheel when it shifted position along with a broken frame on a bike.
|
|
|
11-26-2017, 10:34 AM
|
#5
|
Senior Member
Join Date: May 2016
Location: South Jordan, Utah
Posts: 2,228
|
Simple answer "Don't DO IT"
Our son in law did and nearly had disastrous results. We were following and saw the whole thing play out.
The metal used on the rear bumper is way too thin. It will tear at the support welds. The welds are strong enough but the bumper material is just too thin to support the stress of a bike rack cantilevered off the bumper and the twisting that occurs as you go down the road. The material just tears away from the supports.
Spend about $400 and have a shop weld a real 2" receiver hitch to the back of your Hideout and never worry about your bikes again.
__________________
2017 Cougar 279RKSWE
2007.5 Dodge Ram 2500 6.7 Cummins
Retirement Training Completed
I think the little voices in my head have started a chat group.
|
|
|
11-27-2017, 05:09 AM
|
#6
|
Member
Join Date: Oct 2016
Location: Tottenham, Ontario
Posts: 37
|
I added a bike rack to the back of our travel trailer by making a hitch that mechanically mounts to the frame and sits just up under the 4" bumper. The bumpers are way to thin and so poorly mounted to the frame, I question whether they structurely can support the spare tire safely.
__________________
2014 Ram 1500 Laramie
2017 Keystone Springdale 2660RL
|
|
|
11-27-2017, 05:13 AM
|
#7
|
Member
Join Date: Oct 2016
Location: Tottenham, Ontario
Posts: 37
|
The next tricky part is to find a rack that is rated to be used on the back of a travel trailer. Most rack manufacturers specifically state not to use them on the back of an RV.
__________________
2014 Ram 1500 Laramie
2017 Keystone Springdale 2660RL
|
|
|
12-02-2017, 10:44 AM
|
#8
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
They likely do not advise it because of the bounce. As a state trooper more then once I stopped RVers who had stuff about to fall, did fall or will fall off a RV bumper mount. As stated just follow someone with anything added to the rear bumper or even a hitch. The items need more support and tie downs then most use.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
12-02-2017, 06:12 PM
|
#9
|
Senior Member
Join Date: Aug 2017
Location: Schulenburg
Posts: 1,164
|
Everything that's been said above. I welded two 1/4" thick pieces of angle iron back to back between the bumper support tubes behind the bumper and flush with the top of the bumper. I then welded a 12" receiver hitch tube to the angle iron and let it rest on top of the bumper.
Sent from my LG-LS993 using Tapatalk
__________________
Joey
2017 Hideout 308BHDS
2006 F-350 6.0L PSD CC 4X4
|
|
|
12-04-2017, 06:32 AM
|
#10
|
Member
Join Date: Oct 2016
Location: Tottenham, Ontario
Posts: 37
|
Quote:
Originally Posted by Ken / Claudia
They likely do not advise it because of the bounce. As a state trooper more then once I stopped RVers who had stuff about to fall, did fall or will fall off a RV bumper mount. As stated just follow someone with anything added to the rear bumper or even a hitch. The items need more support and tie downs then most use.
|
I agree, on my rack I replaced the thumb screw tighteners with nylon locking nut and actual bolts, as well as adding two tightening rods that run from the upright post to the mounting bolts that mount the hitch to the trailer frame rails. These give the rack a 3 point connection to the frame of the trailer reducing the chance of the bikes and rack from whipping when the trailer bounces down the hiway.
__________________
2014 Ram 1500 Laramie
2017 Keystone Springdale 2660RL
|
|
|
12-04-2017, 07:24 AM
|
#11
|
Junior Member
Join Date: Jun 2012
Posts: 28
|
Quote:
Originally Posted by Pete B
Can I bolt a bicycle rack to the back bumper of my hideout 26rls? It bolts on with u- bolts.
|
I have the same hideout and I use a bolt on for 2 bikes, but that's all. I researched it for a while and talked to a lot of people and I decided to go for it, it's worked fine for 4 years, I also gone on very long trips. Don't put anything heavier or you'll be in trouble
|
|
|
12-04-2017, 10:07 AM
|
#12
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
What ever a person puts on the rear of the RV. I suggest have a way to see what's happening to your cargo. Someone follow or use a go pro etc. and really make sure it is not bouncing like a yo- yo before you take it on any trip.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
01-02-2018, 10:44 AM
|
#13
|
Member
Join Date: Jul 2017
Location: Kouts
Posts: 81
|
here's a short answer....OH GOD NO ! Was following a friends camper. I ran over the first bike, the bumper and the second bike went off to the side of the rode with no danger. I quicky bought the mount and rack that bolts to the a frame above the propane tanks.
|
|
|
01-15-2018, 08:47 AM
|
#14
|
Junior Member
Join Date: Mar 2017
Location: Canton
Posts: 9
|
On my Passport, I installed a 2” receiver direct to the frame rails which holds a 1Up bicycle rack. We’ve had no issues.
Sent from my iPhone using Tapatalk
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|