Just left Myrtle Beach this morning and noticed something on our carpeting when slide was pulled in. It was some light sticky residue and I quickly determined it was a result of damaged coroplast. I used some HD black tape for a temp repair and headed home. Obviously the damage was caused by the slide catching on something on the way in. Damage was limited to a 4 in square area and the backside of it is wood base. Wood did not appear damaged, BUT, may require more inspection tomorrow when I can really slide under there and take a look - see.
I am quite sure I will need to adjust something, someplace as the slide will likely do the same thing when I open it tomorrow on our permanent home site in the mountains.
Any reference to past threads, etc, will be appreciated. This is a 2011 Outback Sydney, 36 ft, 326FBH.