|
04-30-2017, 06:52 AM
|
#1
|
Member
Join Date: Mar 2017
Location: Idyllwild
Posts: 39
|
Pendant lights
Pendant lights
Can't figure out how to remove the bulbs from the pendant lights I broke one trying to get it out I can't even figure out how to get the other one out any help would be appreciated thank you
|
|
|
04-30-2017, 06:56 AM
|
#2
|
Senior Member
Join Date: Jan 2014
Location: Tidewater Area Virginia
Posts: 1,271
|
They're in there tight. Sometimes it helps to push up slightly and then turn. Just have to find the happy medium of not to much pressure to break the bulb. Can be tricky.
__________________
2014 Raptor RP300MP w/ Rear Patio Party Deck, Folding Side Ladder, 6 Point Level Up, Carlisle Radial Trail HDs
2004 2500HD D/A CC SB - TTT Mirrors, Prodigy BC, 18K Pullrite Superglide, NEW Fuel Injectors 11/2015 (ouch)
|
|
|
04-30-2017, 07:10 AM
|
#3
|
Site Team | Emeritus
Join Date: Jan 2014
Location: Western PA
Posts: 2,732
|
I would think it would be nice to know the type base on the bulb in the Pendant lights. Need to know if you just pull, twist. twist and pull, ... etc
I have a feeling canesfan may be the one to ask, Do not ask
__________________
2013 RAPTOR 300MP w/Rear Patio Deck NO Folding Side Ladder
2013 Silverado 3500HD LTZ CC LB 4X4 DRW
Duramax 6.6L Turbo Diesel; Allison Trans
Reese 20K; Carlisle Radial Trail RH/HD; TPMS (12 Tires)
Veteran
PSU (GO LIONS)
|
|
|
05-01-2017, 05:54 AM
|
#4
|
Junior Member
Join Date: Jan 2015
Location: Ocala, FL
Posts: 27
|
I want to say that the base is like that of an automotive tail light bulb. Push and twist.
|
|
|
05-01-2017, 05:58 AM
|
#5
|
Senior Member
Join Date: Jan 2014
Location: Tidewater Area Virginia
Posts: 1,271
|
It's a 1076 bulb most likely, push and turn.
__________________
2014 Raptor RP300MP w/ Rear Patio Party Deck, Folding Side Ladder, 6 Point Level Up, Carlisle Radial Trail HDs
2004 2500HD D/A CC SB - TTT Mirrors, Prodigy BC, 18K Pullrite Superglide, NEW Fuel Injectors 11/2015 (ouch)
|
|
|
05-01-2017, 04:01 PM
|
#6
|
Senior Member
Join Date: Jul 2013
Location: Liberty, Texas
Posts: 5,034
|
Pendant lights .....argh.
I found one hanging by the wires last summer. Base was all messed up where that thumbscrew is. Houston mega dealer ordered one for me. The bulb in the other burned out and the socket is buggered up beyond all recognition. So now I need another one. Probably have to get 2 new ones to match.
I-95 still bad. Diesel $2.55 gallon in N Carolina. Was hot in Richmond VA for NASCAR. Raining in Columbia SC.
Down the road I go.
__________________
2018 Ram 3500 Laramie CC DRW LWB 4X4 Cummins Aisin 3.73
Reese Goosebox 20K
2018 Heartland Landmark 365 Oshkosh
2008 Bigfoot 25C9.4 LB Cabover
2023 CanAm Defender SXS
|
|
|
05-02-2017, 07:57 AM
|
#7
|
Member
Join Date: Mar 2017
Location: Idyllwild
Posts: 39
|
Thank you all for your replies. I am sure it is a push/turn bulb but the problem is on both the pendent lights, I cannot remove them. Period. I broke one bulb and the other one is in there so tight I'm afraid to mess with it any more. On the broken one, I am going to take the light down to deal with it...take it apart and fix it. The other one is still working but when I have to replace the bulb there will be the same frustrating problem...any other suggestions?
|
|
|
05-02-2017, 08:14 AM
|
#8
|
Senior Member
Join Date: Jan 2014
Location: Tidewater Area Virginia
Posts: 1,271
|
A blow torch and sledgehammer?
Sorry you're having difficulties. Mine are tight, I was worried about breaking them taking them out and also worried about breaking the LEDs putting them in. No other suggestions at the moment.
__________________
2014 Raptor RP300MP w/ Rear Patio Party Deck, Folding Side Ladder, 6 Point Level Up, Carlisle Radial Trail HDs
2004 2500HD D/A CC SB - TTT Mirrors, Prodigy BC, 18K Pullrite Superglide, NEW Fuel Injectors 11/2015 (ouch)
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|