InCommand Generator stop issue
Before I contact ASA about this, I thought I'd see if anyone else had this issue.
I have a 2018 Fuzion 345 with the Onan generator. Over the winter, I pulled the battery and changed the oil on the generator. When I put the battery back in a couple of weeks ago, generator fired right up without an issue. When I went to stop it, the InCommand pad (as well as the phone app) still showed the generator "start" button, it did not change to a "stop" button. I had to pull the cover and stop the generator with the switch.
I checked the wiring in the BCM and everything looked tight. Power cycled the system.
Everything looks tight on the generator as well. All other functions I could test in InCommand are working as well, just this one issue. Any thoughts?
|