Quote:
Originally Posted by JRTJH
It's stamped on the reverse side of the wheel (typically on the spoke) or is stamped inside the wheel, in which case you'd need to remove the tire to see the rating stamp. Here's one example
|
IMO, those pictures confirm that the wheel is manufactured in two configurations. One is for four lug mounting and provides 2540# of load capacity with a maximum recommended PSI pressure of 65 PSI. The other configuration is for 5 lug mounting and provides 2830# of load capacity with a recommended maximum PSI pressure of 80 PSI.
NOTE: When increasing a tire's load capacity by increasing its PSI, one must insure the valve stem is certified for the higher PSI.