Keystone RV Forums - View Single Post

Pull Toy · 03-11-2019, 12:43 PM

In light of the fact that it's a brand new rig, you might want to check for construction detritus in all of the plumbing parts. Try taking the shower head off of the hose and check for adequate flow, and then re attach it. Also try work the manual shutoff button on the shower head a few times. The same goes for all sink strainers. It's will amaze you how much sawdust and stuff come "FREE" with a new trailer. Also, depending on your shower heads design, there may be a flow restrictor (water saver) in the line. This can be popped out for better flow, but the sacrifice is more water consumption if your dry camping.

We run 50#s and have more than adequate water pressure with the factory shower head.

Good Luck,

03-11-2019, 12:43 PM	#3
Pull Toy Senior Member Join Date: Mar 2015 Location: Southeastern Connectiut Posts: 1,307	In light of the fact that it's a brand new rig, you might want to check for construction detritus in all of the plumbing parts. Try taking the shower head off of the hose and check for adequate flow, and then re attach it. Also try work the manual shutoff button on the shower head a few times. The same goes for all sink strainers. It's will amaze you how much sawdust and stuff come "FREE" with a new trailer. Also, depending on your shower heads design, there may be a flow restrictor (water saver) in the line. This can be popped out for better flow, but the sacrifice is more water consumption if your dry camping. We run 50#s and have more than adequate water pressure with the factory shower head. Good Luck, __________________ Pull Toy Steve & Jan, Ava & Emma (Mini Schnauzers): 2016 F350 Lariat 4X4 Powerstroke CC/SB "PULLTOY V" 2013 Alpine 3535RE "MAGIC CARPET IV" Proud Navy Vet!