[MustBeNice]

Not to hijack, but I see the OP has already ordered his B&W Slider.....

So, I have a very similar situation..... 2016 Cougar X-Lite 28DBI & 2015 RAM 3500 CCSB and look for the right hitch. Was thinking the standard B&W Companion for RAM mounts.... and just configuring head uprights to rear-most position. Now after reading this, I'm on the fence (still).

The only difference / adder I have from the OP is that I occasionally "tandem tow", but ~14-15K is just that on either a 20K or 24K rated hitch & 17K rated truck.

So I ask.... Does anyone have experience with the B&W Slider (RVK3670) ? Is it solid in the forward (high speed) locked position? As I always associate moving parts to wear, which = rattles and noise?!

NOTES: I've pulled this same camper with my past truck (a 2009 Chevy 2500HD CCSB w/ rail mounted Reese 15K Pro series hitch) for 3+ years no issue and no slider. Couldn't quite get to 90° (maybe 80+°) when tested on flat ground, but still no issue.

Any & All thoughts would be great.....