Quote:
Originally Posted by chuckster57
If the new springs are the same length I don't see any issues. You'll have to keep in mind that the AXLE will still only have a 6000# rating.
|
Good point! If it were me I would consider replacing the 6000# axles with Dexter 7000# axles which is what is on my 2010 fusion 302. I'm just saying if it were me and I had taken it apart that far. No question then.
__________________
 2007.5 Silverado 3500 HD,DRW, LTZ red, afe II airbox w/ torque tube, transferflow 56 gal replacement tank,
banks speed brake, transgo jr shiftkit, aux trans cooler, b&w companion hitch.
2010 Fuzion FZ 302 has 12ply F-loads, Dexter ez-flex w/ wet bolts, 6 volt Deka GC 15 batteries, 1 gen battery, solarpanels, leds inside, replaced clear textured door glass with tinted, 87 gallons of loc-tite.
Decals removed.
AKA CONFUZION / PORH HONKY.
|