Keystone RV Forums - View Single Post - 2007 Keystone 18RS Outback rear slider parts?

jack65 · 08-03-2018, 06:55 PM

Update on my slider rollers/rails. As these first 4 pics show, what the right and left looks like hanging loose and with the jack support to keep weight off and for traveling. The left side rail looks a little loose compared to the right side, even with jack support. This weekend I will slide the bed out and put a washer under the rail screws on right side to see if that helps.

In last pic, I had moved the jack over a bit to be dead centered between the two sliders rails. I'm going to cut 2x4 to put on the sides so it doesn't move while traveling.

Do you guys know of something I can buy locally, such as Home Depot (or) that would serve my purpose better?

08-03-2018, 06:55 PM	#26
jack65 Senior Member Join Date: Mar 2018 Location: Puyallup Posts: 244	Update on my slider rollers/rails. As these first 4 pics show, what the right and left looks like hanging loose and with the jack support to keep weight off and for traveling. The left side rail looks a little loose compared to the right side, even with jack support. This weekend I will slide the bed out and put a washer under the rail screws on right side to see if that helps. In last pic, I had moved the jack over a bit to be dead centered between the two sliders rails. I'm going to cut 2x4 to put on the sides so it doesn't move while traveling. Do you guys know of something I can buy locally, such as Home Depot (or) that would serve my purpose better? Attached Thumbnails __________________ 2015 Starcraft AR-ONE 14RB 2014 Ram 1500 SLT Quad Cab 4x4 5.7L V8 Hemi 395 HP, 410 TQ 8-speed auto, w/3.92 rear ratio K&N 71-1561 Air Intake w/FlowMaster Exhaust system.