[hankaye]

wiredgeorge, Howdy;

I use 2 of these which are cut into 6' & 4' lengths.
https://www.lowes.com/pd/Amerimax-Co...ter/1000246365
Whenever I need to change locations, not often, I find it convenient to try to keep
the sewage outlet as near to the hole in the ground as possible. I also use some
8X8X16 concrete block that has been carefully broken as supports for the gutter.
I use one full half with the short risers for the base that supports the slinky and
gutter so that it can turn and aim for the hole. The second half I broke one of the
legs off about 1/3 of the way from the end that remained. that I can either elevate
or lower as needed to create a nicely sloped tube to the hole. Haven't had
any problems in over 7.5 years and counting.

hank