Keystone RV Forums - View Single Post

Canonman · 11-20-2017, 04:59 PM

There is a power connector located on the motor side for the awning for the LED strip.
You can use a volt meter to check for 12v at that connector. If the 12v is present with the switch on then it's the LED strip. If no 12v then you'll need to check the switch at the panel. Could be the connector came off the switch.

11-20-2017, 04:59 PM	#3
Canonman Senior Member Join Date: May 2016 Location: South Jordan, Utah Posts: 2,227	There is a power connector located on the motor side for the awning for the LED strip. You can use a volt meter to check for 12v at that connector. If the 12v is present with the switch on then it's the LED strip. If no 12v then you'll need to check the switch at the panel. Could be the connector came off the switch. Attached Thumbnails __________________ 2017 Cougar 279RKSWE 2007.5 Dodge Ram 2500 6.7 Cummins Retirement Training Completed I think the little voices in my head have started a chat group.