Keystone RV Forums - View Single Post

**sourdough** · 12-01-2017, 02:03 PM

If the fender is split on the trailer they (or you) will have to cut it. I had them order another one once because the person cutting the fender apparently had double or triple vision .....and I caught it with my tri focals!

If you do it yourself I will say that the guys putting mine on at the shop could REALLY run a bead of sealant on the top of the fender. I can run a pretty good bead but theirs was excellent.

At the mouth of the fender cut I used the thinner, 1" aluminum strips from HD and formed them to fit between the fender and the trailer and secured them with self tapping screws/speed nuts. Good luck.

12-01-2017, 02:03 PM	#5
sourdough Site Team Join Date: Feb 2014 Location: W. Texas Posts: 17,674	If the fender is split on the trailer they (or you) will have to cut it. I had them order another one once because the person cutting the fender apparently had double or triple vision .....and I caught it with my tri focals! If you do it yourself I will say that the guys putting mine on at the shop could REALLY run a bead of sealant on the top of the fender. I can run a pretty good bead but theirs was excellent. At the mouth of the fender cut I used the thinner, 1" aluminum strips from HD and formed them to fit between the fender and the trailer and secured them with self tapping screws/speed nuts. Good luck. __________________ Danny and Susan, wife of 56 years 2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10 2020 Montana High Country 331RL