Quote:
Originally Posted by chuckster57
If the room “runs” all the way in and out smooth, then chances are the mechanism is ok. From your description there may be an alignment problem. Just a WAG as I’m not standing there looking at it.
|
The room seals are in the same place they were before the incident. Does that indicate good alignment?
The flange was a little warped but I straightened it.
__________________
2018 Hideout 31RBDS TT
2004.5 Ram Quadcab Short Box 2500 5.9HO, 2WD, Auto, 373s, Edge Insight CTS2.
|