Quote:
Originally Posted by SLIMSHADIE
Xrated nice job. Just clarifying the motorcycle stand. The plywood is held down using the existing tie downs with longer bolts. The stands are bolted thru with carriage bolts thru the plywood upside down. So the when removing the stands the bolts are still there sticking up?
|
They are, but what I did is cut a couple of pieces of 2x4 about two or three inches longer on both ends, drill holes in them and place them over the studs sticking up. Not the perfect solution, but at least you won't tear your toes off if barefoot. Probably a better solution might have been to put a couple of those metal inserts in from the bottom of the plywood, that have machine threads, and then screw in a bolt into it.