Keystone RV Forums - View Single Post

**sourdough** · 02-20-2018, 08:45 AM

I have to chime in here with the others. On a 2015 model Keystone isn't going to have anything to say....it's yours.

I'm also thinking that the bar clamps and Tite Bond might do the trick. I'd go at least 220 grit. Depending on the damage you may want to strip them and re-stain, or, I've had great luck mixing stains to match projects I work on; but then again I've got about 40+ cans of various stains to mix and match until I match it; if one straight out of a can won't work. Get some veneer of the same kind of wood to test it on.

On the other hand, a cabinetmaker can probably fix you up as well; just reach in the wallet and open wide.....

02-20-2018, 08:45 AM	#7
sourdough Site Team Join Date: Feb 2014 Location: W. Texas Posts: 17,695	I have to chime in here with the others. On a 2015 model Keystone isn't going to have anything to say....it's yours. I'm also thinking that the bar clamps and Tite Bond might do the trick. I'd go at least 220 grit. Depending on the damage you may want to strip them and re-stain, or, I've had great luck mixing stains to match projects I work on; but then again I've got about 40+ cans of various stains to mix and match until I match it; if one straight out of a can won't work. Get some veneer of the same kind of wood to test it on. On the other hand, a cabinetmaker can probably fix you up as well; just reach in the wallet and open wide..... __________________ Danny and Susan, wife of 56 years 2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10 2020 Montana High Country 331RL