And the answer from Reese is........
3/4" of an inch would be excessive. 1/8" is very acceptable.
The answer says a lot to me. They don't want to state that [blank] or less vertical movement is acceptable in this application because it would state a limit that a lawsuit could win damages from. The use of English scale in reply to a question that used Metric scale leads me to think that a staffer in a cubicle looked in their corporate answer book and posted the company's response.
__________________
Bill & Anne, Athena (cat), Jada (pup), and Cupcake (cat)
Retired Navy CPO, Vollie Firefighter and Industrial Maintenance Specialist
Wilson III: 2015 Ram Tradesman 2500 6.4l CC 4x4 SB
the gypsy, Belle III: 2018 Sprinter Limited 3531 FWDEN
|