Quote:
Originally Posted by TLB
Once again chuckster57 is the person with the answers  |
I agree !!! If the tear is "too close to the edge "rollover" and there's not enough along the side to adhere, just remove the "gutter molding" in that area, apply the Eternabond tape "all the way to the edge of the TPO", reinstall the "gutter molding" over the Eternabond and then seal with DICOR self leveling sealant on "horizontal surfaces" and DICOR non self leveling sealant on "vertical surfaces"....
No need to make it any more "painful to talk about than to perform the repair"....
On the other hand, if the insurance company opts to replace the roof and your deductible is less than the "Eternabond repair" then you've got to either "flip a coin" or "make a decision".... Otherwise, Eternabond and DICOR seem the most logical (as well as economical) repair choice.