Gaps around seam cover
Got our camper back. Indeed John was right. Technician looked at the rivnut/bolts and saw where the bolts had started to turn rusty and could see where some of the water was entering the ac to the inside. Placed silicone as John described around bolts and underneath.
When I got the camper back I checked the clam cover and was amazed at the gaps between the bottom and top cover compared to the other ac at the front of our camper. Applied gorilla tape and will see if the problem is fixed in the next heavy rain. It's raining steady and light today and no problems so far. Keeping fingers crossed..
Check out the before and after pics of the seam gaps compared to the other ac at the front of our camper/bedroom area..
I will be contacting montana and dometic to advise of the design fault and see if this cover can be replaced.
|