[Tinner12002]

Originally Posted by dcg9381

Those are excellent tires. I agree with the above, at least in principle.

Throw a camber gauge on the trailer wheel, see if you're tweaked.

If I recall right, factory axles are actually not straight, they are intentionally cambered in a negative manner by bowing the axle up towards the RV floor. This helps the camber go neutral upon applying weight...

I believe that also to be correct but if the OP puts a level on the bead it might show the bubble outside the line away from the wheel and not outside of the line toward the wheel which would be a neg camber, so sounds like were on the same page. Some of us don't have the fancy tools so we have to just use a level...lol!