Keystone RV Forums - View Single Post

**chuckster57** · 07-03-2015, 04:55 PM

It is possible that your slide is "out of synch", the proof is in the tape. Extend the slide and once the front edge makes contact let off the switch.

Then measure the distance from the trailer body to the exterior wall of the slide. Do this at the same spot on both ends. Of the measurement is within 1/4" IIRC its considered okay.

What type of slide mechanism do you have?

07-03-2015, 04:55 PM	#3
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,357	It is possible that your slide is "out of synch", the proof is in the tape. Extend the slide and once the front edge makes contact let off the switch. Then measure the distance from the trailer body to the exterior wall of the slide. Do this at the same spot on both ends. Of the measurement is within 1/4" IIRC its considered okay. What type of slide mechanism do you have? __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.