Quote:
Originally Posted by cant_remember_ID
I added a light switch for the Pendant lights and the overhead lights in the kitchen area. I hated fumbling with the switch in the dark that was located in the control panel.
I cut a square hole below and left of the thermostat. I unhooked one wire that was connected to the switch in the control panel, pulled it down through the hole. I ran a new wire from the new switch to the switch in the control panel. Now both switches have to be on for the light to come one, but I will probably leave the control switch on all the time.
|
I know it's been a while, but any chance you have any info on which wires you unhooked and rerouted? Or can possibly point me to the info? I got a 2 outlet switch, I want to run both the pendant and ceiling lights to the double switches. Thanks!