[Zoe]

Hello again! We are excited to take our ‘new’ camper out for the first time. Purchased it last October and it spent almost three months at the dealer having a roof leak issue repaired (hopefully!). Brought it home from inside storage to prep for camping. While washing the exterior we discovered that the rear wall ‘gives’ quite a bit if you push on it. It actually bows out in the center and seems to be attached to the frame only at the edges. All the other exterior walls and all interior walls are solid, sound and secure feeling. No bouncing back when pushed on. So before freaking out, and before calling either the dealer or the manufacturer to question whether this is “normal” (because at this juncture I’ve learned that anything that will cost $$ to repair will be called normal...) I thought I’d reach out to the experienced and knowledgeable folks on this forum to find out if that back wall is supposed to be that way or not. You all came through with sound advice before and we’ll appreciate it any info you can share about this! Thanks again!