[chuckster57]

Your not leading me wrong. I think if anything your not understanding what I am trying to tell you.

If the slide is indeed schwintek, it HAS TO HAVE the controller I showed in a previous post. The controller is what makes the slide work. The InCommand system is merely a different way to get the controller energized. In the end the CONTROLLER has to have 12VDC and a signal to tell the motors what direction to turn.

Your RV has the InCommand. Tiffen uses the Sdyder system. Grand design uses LCI one touch. In ALL cases the controller is present “somewhere” in the coach.
When you use either the remote or the buttons, it sends a signal (12V) to the “EXT” or “RET” contact telling the controller to turn the motors in a particular direction. At the end of travel, the CONTROLLER senses amp draw from each motor and shuts them off.

I think they may be “out of synch”, and if you read the PDF I linked, the instructions are there how to reset them. I’ve done it a number of times on several units. If they won’t “synch” then you really need to find the controller and look for a trouble code.