View Single Post
Old 12-14-2017, 11:49 AM   #3
Lee
Senior Member
 
Join Date: Feb 2013
Location: Lacey, WA
Posts: 499
Hi,

I had the exact same problem with mine last Spring.

On my rig, I had cut the input line to the pump from the FWT and installed a "T". I then installed a valve and a short piece of tubing onto the "T". When I winterize I open this valve and put the end on the tube into a gallon jug of pink antifreeze. When I turn on the pump and open a faucet antifreeze gets sucked into the pump and sent out to the open faucet.

When I had my No Prime problem, I opened the winterize valve and poured a little bit of water into the end of the hose which primes the pump. Then closed the valve and "Wallah" pump operated normally.
__________________
Lee

1970 F250 Highboy 4x4
2013 Cougar 21RBSWE
Lee is offline   Reply With Quote