View Single Post
Old 05-08-2018, 02:06 PM   #49
Gord
Member
 
Gord's Avatar
 
Join Date: Mar 2018
Location: Sechelt, BC
Posts: 66
If he is sure that the line from the trailer to the dump is not full he could disconnect the line from the trailer. Then you can install a clear Y fitting that has the dump line connected to it and it has a smaller fitting with a valve on it that a water hose connects to. This allows you to back flush up the trailer lines to the tank. Because the fitting is clear you can see if anything comes out after a short burst of water up the line.
Gord is offline   Reply With Quote