I have directv with 2 receivers in my fiver. You can't split the signal cable from the dish to two different receivers. You will need to run two cables from the dish, one to each receiver. There are mods you can do to use the existing coax in the rv but must not have in line splitters. Barrelled connectors are OK to use to modify the interior cables. If you unscrew and pull out your ota antenna amp from the wall, you might find a factory installed splutter there that makes connections to the various coax outlets. I made it so both cables from my dish end up there then made the corresponding connections (with barrel connectors to the cables that ran to the TV locations where my receivers are. If you want greater detail, shoot me a pm.
Steve
|