Quote:
Originally Posted by Wxman
If it didn't have a max pressure stamp, did it have a max weight stamp on the wheel? If the max weight was up to the LRE weight, or more, I believe the max pressure is 'automatically' up to the corresponding LRE pressure. Metal valve stems above 65psi is the standard for most. Mine have a weight stamp only that I can't read without removing the wheel.
Good luck
|
Good point. I’ll check for a weight stamp the next chance I get. I know it had some stamping on the backside, just nothing about pressure. Had to lay down underneath to look.
Already bought some metal stems. Some of the cheapest insurance available if you ask me.