Quote:
Originally Posted by flybouy
If you run it on lp does it ever shut off? If in fact you have a "good flame" then the only thing I can think of might be a great deal of scale build up acting as an insulator on the heat exchanger/burner tube. When you replaced the anode did you flush out the tank?
I'm sure others will chime in with other ideas.
|
Frankly I was concerned about the water being unaffected that I shut off the LP burner. Yes I did flush out the anode chamber before installing the new. Maybe I'll remove the anode and check for excess scale. The anode I removed was worn beyond usefulness. Thanks for your response.