If you are talking about the plastic wire loom and hyd hose support then yes they will break... mine did on one side and I repaired using a stainless steel hinge mounted to frame with stainless #10 SM screws... Used two 10x32 stainless machine screws with washers and nuts to secure plastic to other side of hinge.. it could have used 3 screws but two is what I had on hand..
4 years later and as good as new....
__________________
2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
|